DSPA 11-1, 11-2, 11-3

Properties

  • Exceptional effective non-toxic fire extinguishing agent
  • Uniquely easy to install and maintain
  • Tested as per CEN/TR 15276-1, NEN-ISO 15779, UL 2775 and BRL K23001
  • Approved by EPA for SNAP listing
  • Ecologically safe and environmentally friendly (O.D.P.=0, G.W.P.=0)
  • Very cost efficient

Enquire about this product

1
OCFLGEABCCEKIWA

 

DSPA aerosol generators 11-1, 11-2 and 11-3 can be used as part of a highly effective fire extinguishing system. A DSPA generator is non-pressurised and is installed inside a room or compartment that requires protection. After activation, an aerosol cloud is generated which expands volumetrically, flooding the space and extinguishing the fire. The DSPA generators are mainly designed to be used in areas not usually occupied or unoccupied areas.  These are effective on class A, B, C fires.

Application

The DSPA generators 11-1, 11-2 and 11-3 are recommended for the protection of narrow compartments or objects, such as suspended ceilings, raised floors, cable ducts, transport vehicles, switchgear etc.

Specifications

Model 11-1 11-2 11-3
Dimensions 122x22 mm
4,8” x 0,87”
124x34 mm
4,9” x 1,3”
133x54 mm
5,2” x 2,1”
Total weight 0,55 kg
1,2 lbs
0,8 kg
1,7 lbs
1,3 kg
2,9 lbs
Volume coverage 0.9 - 2.5 m³
31 – 88 ft³
1.3 - 3.9 m³
46 – 138 ft³
2.4 - 6.9 m³
84 – 244 ft³
Discharge time 8 sec 12 sec 20 sec
Activation, current Built-in starter, 1.3A
Operation conditions -40°C to 75°C/  -40°F to 167°F
Up to 95% RH at 54°C
Colour Standard RAL 3000, other colours upon request